Polish Your Hardwood Flooring With Floor Buffer Polisher

The first thing you will need to do before cleaning is to figure out what kind of floor you have. If you are lucky to have a new sealed floor, it is probably a surface sealed floor which requires relatively little care. In case you have an older floor, you most likely have penetrating seal treated floor. You will need to apply more oils and wax to maintain this type of floor.

For cleaning hardwood floors, in the case of a surface sealed floor, you merely need to mop using a product recommended by your flooring manufacturer. Products that do not contain oil, like Oil Soap, are safe to be used. A damp mop and a little soap are often also safe for this type of floor. It’s best to dry out your floors when you are done, because that water can ruin the surface of your flooring.

Mopping the floor with water-based products will not be possible if you have penetrating seal treated floor. You can instead use vacuum or sweep your floor. Old wax will have to be stripped and new coating will be added, so your floor can have deeper cleaning. Usually, you will need to do this two times a year, but you can do it more often.

Stripper needs to be used and you should also make sure to follow the directions. Allow the hardwood floor to dry and try to ensure proper ventilation. Now you can buy some wax that can be applied on your wood floor and you are ready. Read the instructions so you can properly apply the number of coats you wish for.

And at last, we have an important step to do, to use a electric floor scrubber. It’s necesasry to use process like this so you can achieve beautiful shine and that the wax can properly sink in the floor. Lots of folks use floor buffer polisher so they can finish their job much faster and put that beautiful shine on the surface. It’s good to know that a new wood floor buffer will simply pay for itself after you use it 3 to 4 times in your home.